Ultrasonic Gas flowmeter Xonic 10G

 

+  Velocity Measurement: -30 m/s ~ 30 m/sec;

+  Velocity Measurement: 0.05 m/s;

+  Accuracy (Reading): 1.0%;

+  Display: Flow (Instant Flow, standard, mass), Total Flow, Velocity.

 

 

As Xonic-10G Ultrasonic Flowmeter uses Ultrasonic Transit-Time Technology, it shows superiorperformance than the existing pressure gas flow meter. Depends on pipe diameter size, it uses one path or three path ultrasonic sensor(s), and the temperature sensor is embedded to give compensation volume.

Xonic-10G is developed as the first ultrasonic type gas flow meters in Korea and to substitute expensive foreign products by keeping the ultrasonic flow meters performance with reasonable
price. It is 100% made by Korea.

Specification

  • General Specification
  • Measurement method:
  • ultrasonic transit-time difference
  • Velocity Measurement:
  • -30 m/s ~ 30 m/sec
  • Minimum Velocity:
  • 0.05 m/s
  • Display:
  • Flow (Instant Flow, standard, mass), Total Flow, Velocity
  • Accuracy (Reading):
  • 1.0%
  • Reproducibility:
  • 0.25%
  • Diagnostic Function:
  • the shape of ultrasonic signal, value gain, ΔT, FFT
  • Measuring Gas       Type
  • natural gas, gas, AIR, combustion gas
  • Converter
  • Temperature:
  • -20 ~ +80℃
  • Explosion Proof       IECEx
  • Atex
  • Ex d II C
  • Degree of Protection Enclosure:
  • IP65
  • Input/ Output:             Digital Out Analog Cut 
  • Analog In
  • Two normally open collector
  • Two 4-20mA
  • One 4-20mA
  • Interface Communication Tools:
  • RS-232C, RS-485
  • Power:
  • 12~24VDC
  • Transducer
  • Flange Range:
  • Material:
  • Temperature:
  • Working Pressure:
  • Transducer Temperature:
  • 50 ~ 300mm flange type
  • Above range, directly manufacture (3,000mm max.) Stainless 304
  • -20 ~ +80℃
  • 20 bar below
  • 4 wire, -40 ~ +120℃